HST M8x95 General Purpose Anchor Fasteners HILTI
High loading capacity Force-controlled expansion Suitable for tension zone Suitable for shock loading Fire prevention assessment Pre-assembled with nut and washer save time Cold formed
Product manufacturer
HILTIProduct Category
General Purpose Anchor Fasteners
HILTI General Purpose Anchor Fasteners HST M8x95
High loading capacity Force-controlled expansion Suitable for tension zone Suitable for shock loading Fire prevention assessment Pre-assembled with nut and washer save time Cold formed
Technical Specifications Summary
- Product Code
- HST M8 X 95
- Features
- High load capacity, Force-controlled expansion, Fire resistance, Suitable for shock loading, Suitable for tension zone, Pre-assembled with nut and washer, Cold formed
- Application
- Concrete, Cracked Concrete, Hard natural stone
- Drill bit dia
- 8 mm
- Anchor Length
- 95 mm
- Thread Length ( HST)
- 25 mm
- Width across nut flats
- 13 mm
- Clearance hole diameter
- 9 mm
- Min depth drill hole
- 65 mm
- Effective embed depth
- 46 mm
- Max fastenable thicknedd
- 30 mm
- Min concrete thickness
- 100 mm
- Drill bit
- TE-CX-8
More Products from
HILTI
Services & Tools
Comprehensive services and tools to support your General Purpose Anchor Fasteners project needs
Complete Technical Specifications for HILTI HST M8x95
| Property | Value | Unit |
|---|---|---|
| Product Code | HST M8 X 95 | — |
| Features | High load capacity, Force-controlled expansion, Fire resistance, Suitable for shock loading, Suitable for tension zone, Pre-assembled with nut and washer, Cold formed | — |
| Application | Concrete, Cracked Concrete, Hard natural stone | — |
| Drill bit dia | 8 | mm |
| Anchor Length | 95 | mm |
| Thread Length ( HST) | 25 | mm |
| Width across nut flats | 13 | mm |
| Clearance hole diameter | 9 | mm |
| Min depth drill hole | 65 | mm |
| Effective embed depth | 46 | mm |
| Max fastenable thicknedd | 30 | mm |
| Min concrete thickness | 100 | mm |
| Drill bit | TE-CX-8 | — |
| Rec tightening torque | 25 | nm |
Product Documents & Downloads
No documents available for this product
Quality Assurance
We follow 4-point checks at our factory for quality assurance of General Purpose Anchor Fasteners
Raw materials check
As soon as the raw materials come into production units, they undergo test at our labs to get their properties checked, passing which they go to the store.
Product Check
The product thus manufactured, undergoes the most stringent test according to global standards, passing which it qualifies for dispatch.
Check at the manufacturing stage
At different stages of manufacturing, tests are done to validate if the purpose of a particular stage has been served or not. For e.g at the pre-treatment stage it is checked whether degreasing or deoxidizing of the aluminium coil has properly taken place or not.
Post production check
Before being dispatched, thorough visual inspection is done to check product tolerances and any other kind of manufacturing defect.
